Smooth Surface Primer – Betonex 

Description

Solvent-free, polymer dispersion based, pigmented, smooth concrete surface primer.

 Fields of Application

— For indoor and outdoor applications
— For vertical and horizontal surfaces
— For ceilings
— Adhesion improving primer for the application of gypsum, lime and cement-based plasters on smooth concrete surfaces.

Properties

— Increases the adhesion strength of tile adhesives on smooth concrete surfaces by forming a rough surface.
—Prevents the rapid water loss of cement and gypsum-based plasters and provides longer and better workability.
— Ready to use. Easily applicable with either roller or brush.
— Solvent – free. Does not smell and does not harm to environment.

Application

— The substrate must be cured.
— The surface should be cleaned from dust, dirt, oil and old blistered coatings that may prevent good adhesion.
— If necessary, the surface cracks should be filled and substrate should be evened with SIMENTEK SGP500.
— SIMENTEK BETONEX can be applied by brush or roller after adding 4 lt of water into the pail of 12 kg SIMENTEK BETONEX and mixing well with a low- speed mixer. Mixing with max 500 rpm. mixer is recommended.
— The mixture in the pail should be
remixed periodically during application.
— Drying time is 45-60 minutes. Do not apply anything on within this period.
— Ensure that the air and the surface temperature is above 5°C and the surface is protected from rain during application.
— Plaster should be applied after min. 24 hours on the SIMENTEK BETONEX.
— Hands and equipment should be washed well after application.

Warnings

— Indicated consumption is a general information. It may change depending on the application conditions and surface properties.

Storage

— Store in clean and dry medium and in temperatures from 5°C-35°C

Packaging

— 12 kg plastic pails.